CORNER RADIUS END MILLS
55104169 ~ 55104197
Description
Specification
4 FLUTES CORNER RADIUS END MILLS
UNIT: mm
| ITEM NO. | TYPE NO. | DIAMETER (D1) |
CORNER R | FLUTE LENGTH (L2) |
O.A.L (L1) |
SHANK DIA (d2) |
|---|---|---|---|---|---|---|
| 55104169 | JER 0102 | 1.0 | 0.2 | 2 | 50 | 4 |
| 55104170 | JER 0202 | 2.0 | 0.2 | 4 | 50 | 4 |
| 55104171 | JER 0205 | 2.0 | 0.5 | 4 | 50 | 4 |
| 55104172 | JER 0252 | 2.5 | 0.2 | 5 | 50 | 4 |
| 55104173 | JER 0255 | 2.5 | 0.5 | 5 | 50 | 4 |
| 55104174 | JER 0302 | 3.0 | 0.2 | 6 | 50 | 4 |
| 55104175 | JER 0305 | 3.0 | 0.5 | 6 | 50 | 4 |
| 55104176 | JER 0310 | 3.0 | 1.0 | 6 | 50 | 4 |
| 55104177 | JER 0402 | 4.0 | 0.2 | 8 | 50 | 4 |
| 55104178 | JER 0405 | 4.0 | 0.5 | 8 | 50 | 4 |
| 55104179 | JER 0410 | 4.0 | 1.0 | 8 | 50 | 4 |
| 55104180 | JER 0505 | 5.0 | 0.5 | 10 | 50 | 6 |
| 55104181 | JER 0510 | 5.0 | 1.0 | 10 | 50 | 6 |
| 55104182 | JER 0602 | 6.0 | 0.2 | 12 | 50 | 6 |
| 55104183 | JER 0605 | 6.0 | 0.5 | 12 | 50 | 6 |
| 55104184 | JER 0610 | 6.0 | 1.0 | 12 | 50 | 6 |
| 55104185 | JER 0615 | 6.0 | 1.5 | 12 | 50 | 6 |
| 55104186 | JER 0620 | 6.0 | 2.0 | 12 | 50 | 6 |
| 55104187 | JER 0805 | 8.0 | 0.5 | 16 | 60 | 8 |
| 55104188 | JER 0810 | 8.0 | 1.0 | 16 | 60 | 8 |
| 55104189 | JER 0820 | 8.0 | 2.0 | 16 | 60 | 8 |
| 55104190 | JER 1005 | 10.0 | 0.5 | 20 | 75 | 10 |
| 55104191 | JER 1010 | 10.0 | 1.0 | 20 | 75 | 10 |
| 55104192 | JER 1020 | 10.0 | 2.0 | 20 | 75 | 10 |
| 55104193 | JER 1030 | 10.0 | 3.0 | 20 | 75 | 10 |
| 55104194 | JER 1205 | 12.0 | 0.5 | 24 | 75 | 12 |
| 55104195 | JER 1210 | 12.0 | 1.0 | 24 | 75 | 12 |
| 55104196 | JER 1220 | 12.0 | 2.0 | 24 | 75 | 12 |
| 55104197 | JER 1230 | 12.0 | 3.0 | 24 | 75 | 12 |
RECOMMENED CUTTING CONDITION FOR CORNER RADIUS END MILLS
| MATERIAL HARDNESS |
CARBON STEELS. ALLOY STEELS S45C,FC,FCD,SCM,S50C,SKS… ~HRC30 |
ALLOY STEELS.TOOL STEELS.SCR, SNCM,SKD11,SKD61,NAK80… ~HRC50 |
HARDENED STEELS SKD11 ~HRC60 |
|||
|---|---|---|---|---|---|---|
| DIAMETER (mm) |
SPEED (mm-1) |
FEED mm/min |
SPEED (mm-1) |
FEED mm/min |
SPEED (mm-1) |
FEED mm/min |
| 3 | 9500 | 450 | 6000 | 290 | 3600 | 120 |
| 4 | 8000 | 800 | 5000 | 480 | 3200 | 160 |
| 5 | 6800 | 820 | 4000 | 500 | 2500 | 170 |
| 6 | 6000 | 900 | 3600 | 530 | 2300 | 220 |
| 8 | 4600 | 1000 | 2800 | 530 | 1800 | 250 |
| 10 | 3500 | 850 | 2200 | 420 | 1400 | 220 |
| 12 | 3000 | 720 | 1800 | 350 | 1200 | 200 |
| 16 | 2300 | 520 | 1400 | 250 | 900 | 150 |