| SPECIFICATION : |
| MODEL |
BMT 1716 |
BMT 1716LB |
| CAPACITY 90° |
| MAX. SWING |
Ø 420 mm |
| SWING OVER CARRIAGE COVER |
Ø 330 mm |
| W / TURRET |
200 mm(VDI) / 250 mm(8T) / 210 mm(10T) |
| W / POWER TURRET (DUPLOMATIC VDI 12T) |
200 mm |
| X AXIS TRAVEL |
180 mm |
| Z AXIS TRAVEL |
550 mm |
| W / 8T / 10T |
530 mm |
515 mm |
| W / VDI (12T) |
510 mm |
500 mm |
| CARRIAGE INCLINATION |
45° |
| SPINDLE |
| SPINDLE CENTER CENTER HEIGHT (FROM FLOOR) |
920mm |
| SPINDLE NOSE |
A2-5 |
A2-6 |
| POWER CHUCK DIAMETER |
169 mm |
210 mm |
| POWER CHUCK SYSTEM |
Hydraulic |
| SPINDLE BORE |
56 mm |
62 mm |
| DRAWTUBE (BAR) CAPACITY |
45 mm |
52 mm |
| SPINDLE FRONT BEARING (INTERNAL DIAMETER) |
90 mm |
100 mm |
| MAX. SPINDLE SPEED |
6000 RPM |
4800 RPM |
| SPINDLE MOTOR (CONT./ 30 MIN. RATING) |
11 / 15 (FANUC ß series) |
| AXIS |
| X AND Z AXIS RAPID TRAVERSE RATE |
12 & 20 m/min |
| X AND Z AXIS SLIDE WAY CONFIGURATION |
Linear way |
| TURRET |
| TURRET DISC DIA. |
340 mm (VDI) / 260 mm (8T) / 280 mm (10T-Opt.) |
| MAX. BORING BAR DIA. |
D32 |
| TURNING TOOL SHANK DIMENSION |
20 x 20 mm |
| TOOL TRAVEL BELOW CENTER LINE |
20 mm (VDI) / 50 mm (8T) / 65 mm (10T) |
| TAILSTOCK |
| TAILSTOCK QUILL TAPER |
MT4 |
| QUILL DIAMETER AND TRAVEL |
Ø 75 x 100 mm |
| MAX. QUILL THRUST |
613 kgs |
| GENERAL INFORMATION |
| SLIDE WAY LUBRICATION SYSTEM |
Auto. |
| COOLANT TANK CAPACITY |
135 Liter |
| APPROX. MACHINE FOOT PRINT |
1750 x 3570 x 1900 mm |
| APPROX. MACHINE WEIGHT |
4200 kgs |
| *The above specifications are subject to change without prior notice. |
